SET UP
QUICK RELEASE SYSTEM (QRS)
QUICK RELEASE SYSTEM (QRS)
TIPS
We supply a variety of Quick Release Systems (QRS) to aid you in your ability to release completely from your kite.
QRS - OPERATION
Grab the release tab and pull until
the curved pin is free. Under tension,
the Velcro will release the harness
loop. (Fig. 1)
•
Make sure your QRS PULL TAB is facing you.
•
To avoid confusion, always ride with the Pull Tab facing the same direction. In the case of an emergency, you will know where it is.
•
You should be familiar with the operation of the QRS in the event of a situation where you wish to activate the QRS feature.
1.
Slide the Velcro through the stainless steel D-ring. (Fig.2)
2.
Fold the flap back over itself. (Fig.3)
3.
Guide the grommet over the QR pin retainer. (Fig.4)
4.
Slide the QR pin through the retainer. (Fig.5)
5.
Flatten the Velcro over the top of the QR pin. (Fig.6)
6.
Close the thin Velcro around the system. (Fig.7)
7.
Your QR system is now ready for use again.
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
QRS - SETTING / RESETTING
