This security leash is Recon's Security Spinning Leash, and is active only when the rider
is hooked into the Harness Loop. Therefore it is important that a secure connection is
made between the Harness Hook and the Harness Loop. This system allows you to de-
power the kite completely, spin your bar freely, and re-launch your kite easily, all while
still being safely connected to your kite.
NOTE: Be advised that when the Security Pin is engaged, you have a semi-permanent connection to the kite. As a safety precaution, know where your
Quick Release Handle is and be educated on how to activate it before engaging the Security Pin.
•
You must be hooked into the Quick Release (QR) Harness Loop in order to activate
the Recon's IMMEDIATE DEPOWER™ feature.
•
Insert the Security Pin into the Harness Hook under the Loop. (Fig.1)
•
Make sure your Quick Release and Recon Systems are set up properly before
launching or engaging the Security Pin on your Harness Loop.
•
We suggest that you engage the Security Pin only when on the water, not while on
land.
RECON GENERATION 2
SECURITY PIN
SECURITY PIN
SECURITY PIN - ENGAGING
1. Double check that your QR and Recon systems are set up
properly.
2. Hook into your harness loop. (Fig.2)
3. Once hooked into the harness loop, only engage the Security
Pin once you are safely on the water and at a safe distance
from any obstructions.
4. Insert the Security Pin into the center of the harness hook,
making sure it is below the harness loop. Your harness loop
must be between the harness hook and the Security Pin in
order for this feature to work properly. (Fig.3)
5. Make sure that the Security Pin is secure. This will keep your harness loop from accidentally dropping out of your harness hook. Your Security Pin
is now ready for use.
SECURITY PIN - RELEASING
You may disengage from the Security Pin in two ways:
A.
With your hands, slide the Security Pin out of the harness
hook. (Fig.4)
B.
Release the Quick Release Handle on your harness loop.
(Fig.5)
(Fig.1)
(Fig.2)
(Fig.3)
(Fig.4)
(Fig.5)
