Chapter 3: DLM6C-AA Setup
3-4
DLM6C-AA Overview and Setup Guide
3.2.3
Rack Mounting the DLM6C-AA
The DLM6C-AA can be mounted in a standard 19-inch equipment rack.
Two people may be required to lift the chassis into place.
The chassis is secured with ten screws, five on each side. Using the
screws provided with the equipment rack, secure the DLM6C-AA to the
rack, starting with the bottom holes and working up, as shown in
Figure 3-2
.
Figure 3-2
Rack Mounting the DLM6C-AA
!
If the rack is not secured to the floor, it is recommended that
the chassis be installed in the bottom half of the rack. This
prevents the rack from being top heavy.
!
Read
Chapter 2
in this manual before completing the following
procedure.
Rack Mounting
Screws (5)
Rack Mounting
Screws (5)
Rack Mounting
Holes (5)
Rack Mounting
Holes (5)
PS2
PS1
5
4
3
2
1
MultiSwitch 700
TM
DLM6C-AA
LKG-10800-98F
TM
H3105-AA
