Chapter 3: DLM6C-AA Setup
3-2
DLM6C-AA Overview and Setup Guide
6.
Remove the Console Cable Kit and set aside. This kit will be needed
to set up the modules for the DLM6C-AA through Local Management.
3.2
SETTING UP THE DLM6C-AA
The following sections describe the procedures that must be followed to
complete the installation of the DLM6C-AA.
3.2.1
Installation Order
Once a suitable site has been chosen, the DLM6C-AA can be installed.
The chassis can be freestanding or rack mounted.
It is recommended that the DLM6C-AA installation proceed in this order:
1.
Install the cable management bar.
2.
Mount the chassis to a 19-inch rack or other secure location.
3.
Attach the ESD wrist strap.
4.
Install the power supply module(s).
5.
Install the interface modules.
