Small Office Remote Access Switch 51
A
CCESSING
THE
C
YBER
SWITCH
Making Connections
Using the provided RS232 null modem cable, attach an administration console to the
CyberSWITCH. The administration port is a 9-pin, male RS232 serial adapter as shown below:
Connect one end of a null modem cable to the console port on the CyberSWITCH, and the other
end to the communication port on the PC. On the PC you must then execute a communication
package to emulate a terminal (VT100). Your communication package should support file transfer
(Xmodem and ASCII) for software upgrades and installations.
Use the following default values for your communication package:
Baud rate
9600
Parity
None
Data bits
8
Stop bits
1
Duplex Full
BRI Term 10BT 10B2 Console DCPower Reset
1 2
Console DCPower Reset
To PC
Null Modem Cable
Female DB9
Connector
Null Modem Cable
Female DB9
