Small Office Remote Access Switch 481
R
EMOTE
M
ANAGEMENT
AMP Out-of-Band Management
•
connect a modem to the CyberSWITCH (using the Console connection)
•
connect the modem to the analog line (use a standard PC modem RS232 cable for this, do
not use the supplied cable)
2.
At the remote management site:
•
connect the managing PC to a modem
•
connect the modem to the analog line (use a standard PC modem RS232 cable for this, do
not use the supplied cable)
U
SAGE
I
NSTRUCTIONS
To access the CyberSWITCH using AMP out-of-band management, your PC must have a
communications package to connect the PC’s modem to the modem connected to the
CyberSWITCH. After you have connected to the CyberSWITCH via modem, you will appear to be
directly connected to the CyberSWITCH. The CyberSWITCH login screen will be displayed. Enter
the login information. You can then enter commands or make any needed configuration changes.
When finished, enter the
exit
command at the system prompt to end the session with the
CyberSWITCH.
Note:
If you need to quit then restart the CyberSWITCH for some reason (for example, to make
configuration changes effective) issue the
restart
command. Then reestablish your
connection.
