Cabletron Systems 6SSRM-02, Installation & User Manual

Page: 18 / 74

Features
1-4 Introduction
TCP/UDP Services
The following table lists some well known TCP/UDP services provided by the 6SSRM-02.
Features
This section describes the following 6SSRM-02 features:
• Address-based and flow-based bridging
• Port-based VLANs and protocol-based VLANs
• IP and IPX routing
• Layer-4 (application) switching
• Security
• Quality of Service (QoS)
• Statistics
• Management
Bridging
The 6SSRM-02 provides the following types of high-speed bridging:
• Address-based bridging – The 6SSRM-02 performs this type of bridging by looking up the
destination address in an L2 lookup table on the line card that receives the bridge packet from
the network. The L2 lookup table indicates the exit port(s) for the bridged packet. If the packet
is addressed to the 6SSRM-02’s own MAC address, the packet is routed rather than bridged.
Table 1-2 TCP/UDP services
TCP Port UDP Port Description
23 Telnet
161 SNMP
67 BOOTP/DHCP Relay Agent
520 Routed