CAB SQUIX Configuration Manual Download

Page: 37 / 64

Diagnostic Functions

8.4

Save Data Steam



Access only with external storage device!

The function

Save data stream

allows to store data incoming via an interface as an .lbl file to an external storage device

(SD card, USB memory module) installed on the printer.



Insert SD card or USB memory module.



Start menu.



Select

Diagnostics > Save data stream



Select the external storage device.



Enter a file name.

The predefined name is composed of the identifier "log", date, clock time and the suffix ".lbl", but may also be

altered.

Confirm the selection with



In the status line of the display the data saving is indicated by the symbol



Send print jobs. All data received by the printer are stored in the .lbl file.



To complete the function select

Diagnostics > Save data stream

again and confirm with

. The .lbl file will be stored in

the root of the storage device.

Figure 20 Saved data stream

Summary of Contents for SQUIX

































































Search results

Summary of Contents for SQUIX

Reviews:

Related manuals for SQUIX

Brands by name

Popular brands

CAB SQUIX, Configuration Manual

Search results

Summary of Contents for SQUIX

Reviews:

Related manuals for SQUIX

Brands by name

Popular brands