C-Dax Pasture Meter, Assembly And Operation Manual

Page: 67 / 71

64
10. When measuring/recording is completed within a paddock or area, press
the right cursor button again. This will cease recording until measuring is
recommenced by repeating steps 10 and 11.
11. Save the data by pressing the right cursor button twice. “Saved” will
appear on the screen followed by “Stop” to confirm that the measurements
have been saved.
12. Travel to next paddock to be measured. (Please Note. The wheels
should be placed in the transport position whenever the Pasture
Meter is not being operated on grass, however brief the period is.)
13. Press right cursor and repeat the processes 10 to 14 as required.
14. Once measurement has been completed, turn off the indicator console
and place the sled wheels in the transport position (See FIG 13 & FIG 14,
Page 24)
WARNING
Ensure that cables are disconnected when uncoupling the sled draw-bar.
Moving the towing vehicle away from the sled with the cables attached will
result in severe damage to the electrical components.