C-Dax Pasture Meter, Assembly And Operation Manual

Page: 22 / 71

19
Set-up Sled & Sensor Assembly.
Attach coupling on the sled to the tow-ball on the ATV. Ensure wheels are down
in the transport position.
Connect sled cable to indicator console cable hanging from rear (See FIG 9) .
Maneuver sled to extreme left and right positions to ensure cable will not foul
wheels and not be damaged by hot exhaust pipe or hot exhaust emissions.
Return sled to position directly behind ATV. Exercising safe lifting practice, raise
wheels and lower sled to the measurement position (See FIG 2 on Page 10) ,
Sled will now be on the ground.
FIG 9