System Administration with CLI
UM1600-2-A 2002
79
Configuring DSL
Creating Line Profile and Alarm Profile
Creating DSL Profile
Describes how to create a DSL Profile.
Command: add lineprof <profile name>
Argument List:
Parameter type
Parameter data-type and
field
Description
lineprof name
String, <= 32
The name of ADSL line
profile.
Rate Mode
Integer,
fixed : (1)
adaptAtStartup : (2)
Defines what form of
transmitting rate to be
adaptated.
Line Type
Fast : (1)
Interleaved : (2)
The ADSL line type.
TargetSnrMargin
Integer, 2 ~ 15
Target Signal / Noise
Margin.
MinTxRate Integer,
ATU-C: “32~ 8064”
ATU-R: “32 ~ 1024”
The minimum
transmitting rate of
ATU-C side or ATU-R
side.
MaxTxRate Integer,
ATU-C: “32 ~8064”
ATU-R: “32 ~1024”
The maximum
transmitting rate of
ATU-C side or ATU-R
side.
MaxInterleaveDelay Integer, 1,2,4,8,16,32,64 The value of Interleave
Delay for this channel.
Note:
1. If you select “Line Type” as “Fast”, you cannot select the value of
“MaxInterleaveDelay”. Please refer to the first example.
2. If you select “Rate Mode” as “Fixed”, the configuration of “MinTxRate” and
“MaxTxRate” must be the same. Please refer to the second example.
Example1: This example shows how to create a DSL profile named
service512K64K.
