System Administration with EmWeb
UM1600-2-A 2002
38
Default (Factory) Configuration Settings
{Default
Setting}
This section describes how to get the information of the default setting of your
IPAM-1600s.
1. Click on “
Default Setting
” from the IPAM-1600s Main Menu.
The
Default Setting
screen appears as follows:
Default Settings
SNMP:
community : “public”
no In-band management channel
IP
IP : 192.168.100.111
Mask: 255.255.255.0
Gateway: 192.168.100.1
System
Bridge – mode
Port-Filter(Port-based VLAN) : Enable
ADSL Port
“up” for all ports
VCC
connection
8/81(vpi/vci) for all ports
VLAN – tag : disable
DSL profile
named “DEFAULT”
1) tx mode : “adaptAtStartup”
2) Line type : “Interleaved”
3) Target SNR margin : “6 dB”
4) mim tx rate : “32 Kbps”
5) max tx rate at ATU-C : “8064 Kbps”
6) max tx rate at ATU-R : “1024 Kbps”.
7) interleave delay : “16 milliseconds”
Alarm
profile
named “DEFAULT”
ATU-C side:
Thresh15MinLofs – 0 sec
Thresh15MinLoss – 0 sec
Thresh15MinLols – 0 sec
Thresh15MinLprs – 0 sec
Thresh15MinEss – 0 sec
initial failure trap – Enable
ATU-R side :
Thresh15MinLofs – 0 sec
Thresh15MinLoss – 0 sec
Thresh15MinLols – 0 sec
Thresh15MinLprs – 0 sec
