manualshive.com logo in svg

C-Com IPAM-1600s Series, User Manual, Page: 114 / 148

Share
Download
C-Com IPAM-1600s Series User Manual Download Page 114

EMS-NetBailiff 

 
 

 
 
UM1600-2-A                                                          2002       

112

 

 

Installing NetBailiff 

1. Insert NetBailiff CD into CD –ROM Drive, say F: 

2. From the Program Manager window, choose the Start button and then Run. 

3. Type “F:\DISK1\SETUP.EXE” in the Command Line field and choose OK, 

then the welcome window of NetBailiff Setup appears. Click on “Next>” button 
to continue. 

 

 

 

 

 

 

 

4. When the user information input window appears, enter your name and 

company name respectively, then click on “Next>” button to continue. 

 

 

 

 

 

 

 

 

5. When the Destination Location window appears, click the Browse button to 

change the installation destination directory or simply use the default setting 
“C:\Program Files\C-COM\SmartDSLAM.    Then, click on “Next>” button to 
continue, 

Summary of Contents for IPAM-1600s Series





















































































































































Reviews:

No comments