System Administration with CLI
UM1600-2-A 2002
85
Example:This example shows how to display default line profile.
SmartDSLAM# show lineprof default
ATU-C:
1. RateMode: adaptAtStartup
2. LineType: Interleaved
3. TargetSnrMargin: 6.0
4. MinTxRate: 32
5. MaxTxRate: 8064
6. MaxInterleaveDelay: 16
ATU-R:
1. Rate Mode: adaptAtStartup
2. RateChanRatio: Interleaved
3. TargetSnrMargin: 6.0
4. MinTxRate: 32
5. MaxTxRate: 1024
6. MaxInterleaveDelay: 16
Table 4-10 “show lineprof” Field Definition
Field Definition
RateMode
The form of transmit rate adaptation
(fixed/adaptAtStartup)
LineType
Fast or Interleaved mode.
TargetSnrMargin
Target Signal/Noise Margin. (dB)
MinTxRate
The minimum transmitting rate of ATU-C side or
ATU-R side. (Kbps)
MaxTxRate
The maximum transmitting rate of ATU-C side or
ATU-R side. (Kbps)
MaxInterleaveDelay
The value of Interleave Delay for this channel.
(milli-seconds)
Displaying Alarm Profile
Describes how to display all alarm profile or specific alarm profile.
Command: show alarmprof <all | alarm profile name>
Argument List:
Parameter Description
all
Show all information.
Alarm profile name
ADSL alarm profile name.
