EMS-NetBailiff
UM1600-2-A 2002
120
data.
2. Enter values in fields, IP Address, and Description. The Apply button to the
left of these fields then become enable.
3. Click on Apply button to apply the agent to the system.
4. If to activate (so-called “Mount”) the system’s monitoring of an agent, click on
the required agent entry in the Demount agent list, then clcik on the Mount
button
. The agent will appear on the Mount agent list on the right.
5. Click on CLOSE button to exit the window or continue to perform other
operations in the same window.
Note:
Sys name is read only. It can be modified either through EmWeb or CLI
If to remove an agent from the system,
1. Click the required agent in the
Demount agent list,
then click on the
Delete
button. The agent will disappear.
2. Click on CLOSE button to exit the window or continue to perform other
operations in the same window.
If to change the information of an agent,
1. Select the required agent in the
Demount agent list.
The information of the
selected agent will then presented on the data fields.
2. Click on
Modify
button.
3. Change IP, Community, and Description as required. The
Apply
button to the
left of these fields then become enable.
4. Click on
Apply
button to apply the change to the system.
5. Click on
Close
button to exit the window or continue to perform other
operations in the same window.
If to activate the system’s monitoring of an agent,
1. Select the required agent in the
Demount agent list,
then click on the
Mount
button
. The agent will appear on the
Mount agent lis
t on the right.
2. Click on CLOSE button to exit the window or continue to perform other
operations in the same window.
If to de-activate the system’s monitoring of an agent,
