BYD EPS14P, Operator'S Manual

Page: 28 / 38

MAINTENANCE
OPERATOR MANUAL 54
EPS14P
55 OM-EPS14P2019001-EN
HYDRAULIC SYSTEM MAINTENANCE
Hydraulic Oil Filling
(1) Pull out the oil dipstick, use the clean cloth to wipe the oil on it, and then insert it back.
(2) Pull out the oil dipstick again, and then see if the oil level is between two marks.
(3) If the oil level is under the lower mark, take of the oil filter cap and refill the oil.
Caution
(1) While adding oil, be careful to prevent dust and water from entering the oil tank.
(2) Do not mix different types of hydraulic oil.
(3) When disposing the waste oil, keep children away and do not pour it into the sewer or
onto the ground.
(4) Using unauthorized hydraulic oil might cause damage to hydraulic system. Use only
authorized hydraulic oil. If you need to switch to other types of hydraulic oils, contact with
the BYD forklift after sales service people.
Hydraulic Oil Replacement
(1) Disconnect the electric line and the pressure hose from the hydraulic unit, and remove it
after loosening the bolts.
(2) Remove the hydraulic unit, drain the oil in the oil tank, and then refill the oil.
< 1 < > 2 >
16
15
15
15
15
12
14
14
14
13
11
17
18
CODE PART NAME QTY CODE PART NAME QTY
11
DATALINE
1 15
BOLT
4
12 PRESSURE HOSE 1 16 RUBBER SEAL 1
13 PRESSURE HOSE 1 17 OIL TANK 1
14 BOLT 3 18 HYDRAULIC UNIT 1