9
EN
Microbiological and sensory quality of the (partially) softened water
The quality of the treated water depends greatly on the conditions under which the product is installed
and operated. The most important factors are listed in the following table.
Unfavourable conditions
BWT recommendations
Quality of the inflow
water
Unsuitable and marginal quality
inflow water may not be altered by
the product.
Contact the BWT drinking water spe-
cialist or fitter.
Operating conditions
Long periods of stagnation, infre-
quent regeneration and incorrect
configuration of the system can
adversely affect the quality of the
luxury water.
Observe the notes in the installation
and operating manual. Contact the
BWT drinking water specialist or fitter.
Quality of the regen-
erative
Impurities from inferior regenera-
tives with insoluble components
cause deposits.
Use of BWT Perla tabs or re-
generatives in accordance with
DIN EN 973, type A.
Installation situation and
conditions
Temperatures in the installation
room greater than 25 °C, evapo-
ration of solvents or an improper
waste water connection may ad-
versely affect the quality of the
luxury water.
Observe the notes in the installation
and operating manual.
When determining whether there is a problem with the sensory or microbiological quality of the treated
water, it is important where in the system the quality is measured. For example, if the quality is measured
at the tap, the water quality may be affected by the pipe material or by the presence of a water heater
or hot water storage tank.
