BWT Perla Hybrid Installation And Operating Manual Download Page 27

Page: 27 / 84

Entering the postcode

Entering the postcode will automatically determine

the water hardness from the

hydromaps

water

hardness database for the installation location of

your product.

►

Tap inside the text box. A keypad is displayed.

►

Enter the postcode of the installation location

of your product and press Enter to confirm your

entry.

Selecting the district

►

Select your district if applicable.

►

Press

CONTINUE

8 6

Checking and setting the water

hardness

For registered products, the inflow water hardness

is taken from the

hydromaps

water hardness da-

tabase. Check that the database value matches the

water hardness at the installation location and adjust

the value for the inflow water hardness if necessary.

►

If necessary, press

ENTER VALUE MANUALLY

►

Enter the water hardness at the installation

location.

►

Select the desired outlet water hardness (luxury

water with approx. 4 °dH), or enter it manually.

After entering, the display automatically skips

forward.

NOTE

►

Do not set the outlet water hardness too

low, as this can lead to increased foaming of

soaps (e.g. in the washing machine).

►

When setting the outlet water hardness,

ensure that the maximum permissible sodi-

um concentration of 200 mg/l in accordance

with the German Drinking Water Ordinance

is not exceeded.

Summary of Contents for Perla Hybrid





















































































Search results

Summary of Contents for Perla Hybrid

Reviews:

Brands by name

Popular brands

BWT Perla Hybrid, Installation And Operating Manual

Search results

Summary of Contents for Perla Hybrid

Reviews:

Brands by name

Popular brands