BWT Perla Hybrid, Installation And Operating Manual

Page: 35 / 84

35
EN
Wi-Fi connection was not successful
If the connection to the home network via Wi-Fi was
not successful, you can scan the QR code with an
Internet-enabled mobile device to obtain further
information.
► Press
REPEAT
to attempt to connect again.
► Press
CONTINUE
to exit the connection wizard.
However, you can also connect the product via GSM
or LAN to continue with registration.
Registration can also be postponed until a later time.
9 4 Connection
All connections can be activated or deactivated at
any time.
► Open the connection settings:
> Settings > General Information > Connec-
tion
You can start the connection wizard, perform a con-
nection test (ping), activate/deactivate connections
or set up a new connection in the
Connection
menu.
9 4 1 Using the connection wizard
If necessary, start the connection wizard:
> Settings > General Information > Connec-
tion > Connection wizard
► Read the related section:
– “9.1 GSM – connection wizard”, page 29
– “9.2 LAN – connection wizard”, page 31
– “9.3 Wi-Fi – connection wizard”, page 33