BWT Perla Hybrid, Installation And Operating Manual

Page: 30 / 84

30
EN
Poor GSM connection
If the GSM connection is poor, you can improve it
by using an external GSM antenna.
► Contact BWT Customer Service to acquire an
external antenna.
► Press
CONNECT EXTERNAL GSM ANTENNA
and follow
the instructions.
If you do not have a suitable external GSM antenna,
you can also establish the connection later or via
LAN or Wi-Fi:
► Press
<
to return to the connection wizard and
select another type of connection.
Connecting an external GSM antenna
► Open the Easy Fill technology cover of the
product.
► Loosen the screws on the internal cover and
then remove it.
► Route the cable of the external antenna through
the opening on the back of the product.
► Connect the external antenna to the connector
on the product (see chapter “6.3 Electrical con -
nections”, page 18).
► Attach the internal cover.
► Close the technology cover so that the cables
are not pinched.
► Press
CONTINUE
.
If the connection quality is still poor, the installation
location is outside the range of the GSM.
However, you can also connect the product via LAN
or Wi-Fi to continue with registration.
Registration can also be postponed until a later time.
NOTE
► The external antenna must be initialised
via the connection wizard and thus auto-
matically activated. If necessary, run the
connection wizard again.
► Ensure that the technology cover can
be easily closed and that the cables do not
have any kinks.