BW GasAlert Quattro, User Manual

Page: 21 / 93

11
GasAlertQuattro
User Manual
Getting Started
The list below provides the standard items included with the detector.
If the detector is damaged or parts are missing, contact the place of
purchase immediately.
• Sensors: H
2
S, CO, O
2
, and combustible LEL
(depending upon sensors ordered with detector)
Note
Detectors that are configured for 1, 2, or 3 gases may contain a
dummy sensor in one of the four sensor locations.
• Calibration cap
• Calibration hose (3 ft./1 m) w/ quick connect
• Charging adapter or 3 alkaline batteries (dependent on type of bat-
tery pack)
• Screwdriver
• Quick Reference Guide
• Supplementary booklet including a quick reference card
• Technical reference guide on CD-ROM
For a list of GasAlertQuattro accessories, refer to Replacement Parts
and Accessories .
Fleet Manager II Options
Fleet Manager II software can be downloaded without cost from BW
Technologies by Honeywell’s website
www.gasmonitors.com .
Fleet Manager II CD-ROM is shipped with the MicroDock II base station.
The detector is shipped with the sensors and a rechargeable or alkaline
battery pack. To replace sensors and maintain the battery pack, refer
to the following:
• Replacing the Sensors
• Charging the Rechargeable Battery
• Replacing the Battery Pack
• Replacing the Alkaline Batteries
To order parts, refer to Replacement Parts and Accessories .
To become oriented with the features and functions of the detector, refer
to the following figures and tables:
• Figure 1. and Table 4. describes the detector’s components.
• Screen Elements describes the LCD icons and screen elements.
• Table 5. describes the detector’s pushbutton.