55
GasAlertQuattro
Calibration
Calibrating Using an IR Device
If the
Cal IR Lock
option is enabled, the sensors must be calibrated
using one of the following IR devices:
• IR Link With Fleet Manager II
• MicroDock II Station (refer to the
MicroDock II User Manual
)
IR Link With Fleet Manager II
To calibrate using the IR Link with Fleet Manager II, complete the
following:
1. From the PC, open Fleet Manager II.
2. Click
.
3. From the Administration toolbar, click
to access the
Enter Password dialog box.
Figure 13. Enter Password Dialog Box
4. Enter
Admin
and click
OK
(password is case sensitive).
5. From the Devices toolbar, click
. The Device
Selection popup displays.
Figure 14. Device Selection Popup
6. Select
GasAlertQuattro
.
7. Activate the detector and wait for the startup self-tests to
complete.
Calibration can be performed during the startup sequence if
•
Calibration overdue
displays,
•
Calibration IR lock enabled
displays,
• or when the detector in normal operation.
8. From Fleet Manager II, click
located at the bottom of
the window.
