GasAlertQuattro
User Manual
24
Figure 4. Device Configuration via MicroDock II
Refer to the following options to define settings for the detector.
Note
When options are enabled/disabled, the checkbox displays with a
red frame until the new settings are saved to the detector. Click
Save to Device
and then click
Retrieve from Device
to remove
the red frames.
Serial Number Field
This field displays the serial number (e.g.
QA109-001000
) of the
detector.
Note
The
Serial Number
,
Firmware Version
, and
Hardware Version
fields are read-only fields. Settings for these fields are factory
defined.
Firmware Version
This field displays the current firmware version that displays on the
detector LCD during the startup sequence. If new firmware is uploaded
to
the detector, the
Firmware Version
field automatically updates.
Hardware Version
This field displays the current hardware version of the detector.
