BVL V-COMFORT Bedding Operating Manual Download Page 15

Page: 15 / 94

Safety

instructions

V-COMFORT Bedding

2.3.5

Warranty and liability

Our "Terms of Sales and Delivery" apply as a general rule. The owner has received these terms no later
than by the time the contract was concluded.

Warranty and liability claims are excluded in cases of personal injury and property damage that can be
attributed to one or several of the following causes:

Improper use of the machine,

Improper installation, commissioning, operation and maintenance of the machine,

Operating the machine with defective safety devices or improperly mounted or non-operational
safety devices and safeguards,

Failure to observe the information provided in the operating manual regarding commissioning,
operation and maintenance,

Unauthorized structural modifications on the machine,

Insufficient monitoring of machine parts that are subject to wear,

Improperly performed repairs,

Natural disasters caused by the impact of foreign objects and force majeure.

Summary of Contents for V-COMFORT Bedding































































































Search results

Summary of Contents for V-COMFORT Bedding

Reviews:

Related manuals for V-COMFORT Bedding

Brands by name

Popular brands

BVL V-COMFORT Bedding, Operating Manual

Search results

Summary of Contents for V-COMFORT Bedding

Reviews:

Related manuals for V-COMFORT Bedding

Brands by name

Popular brands