INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 19 of 68
9.3.8 19” Touch monitor fitting
(VARGM19TS355)
1. Unscrew the nuts (
Fig. 22B ref. 1
) and the wash-
ers (
Fig. 22B ref. 2
) from the screws (
Fig. 22B
ref. 3
). Fit the monitor support (
Fig. 22B ref. 4
)
rotated through 90°. Then screw the previously
unscrewed nuts and washers again.
2. Make the cables (
Fig. 22B ref. 5
) pass into the
plate’s hole (
Fig. 22B ref. 6
) and fix the latter to
the monitor support (
Fig. 22B ref. 4
) by means of
the supplied screws (
Fig. 22B ref. 7
) and washers
(
Fig. 22B ref. 8
).
Fig. 22B
DURING THIS OPERATION PAY
PARTICULAR ATTENTION TO THE
POWER SUPPLY CABLE, TO THE
HDMI CABLE AND TO THE USB CA-
BLE
(
FIG. 22B REF. 5
)
IN ORDER
NOT TO DAMAGE THEM.
MAKE SURE THEY HAVE BEEN
INTRODUCED IN THE SUPPORT
PIPE, AS SHOWN IN FIG. 22B.
3. Connect the cables to the monitor (
Fig. 23B ref. 1
),
as shown in
Fig. 23B
(USB cable
ref. 2
, HDMI
cable
ref. 3
, power supply cable
ref. 4
).
Fix the monitor (
Fig. 23B ref. 1
) to the plate
(
Fig. 23B ref. 5
) with the screws (
Fig. 23B ref. 6
)
and the washers (
Fig. 23B ref. 7
) supplied.
Fig. 23B
DURING THIS OPERATION PAY
PARTICULAR ATTENTION TO
(POWER SUPPLY/SIGNAL/USB)
CABLES’ CONNECTIONS TO THE
MONITOR, IN ORDER NOT TO
DAMAGE THEM AND TO ENSURE
PRODUCT’S CORRECT OPERA-
TION.
4. Fix the guard (
Fig. 24B ref. 1
) to the monitor sup-
port (
Fig. 24B ref. 2
) with the screws (
Fig. 24B
ref. 3
) and the washers (
Fig. 24B ref. 4
) supplied.
Fig. 24B
1297-M008-4_B
LIBRAK355 - LIBRAK355P - LIBRAK355S - LIBRAK355PS - LIBRAK355WS - LIBRAK355PWS
