GB
Page 34 of 68
INSTRUCTION, USE AND
MAINTENANCE MANUAL
14.5.1 Balancing mode
The machine has the ability to perform the wheel bal-
ancing (weights fitting) in 3 different ways:
- using the distance-diameter caliper arm with weights
fitting grippers;
- using the laser at “6 o'clock”;
- weights fitting at “6 o'clock” (without the use of lasers).
- weights fitting at “12 o'clock” (with the use of lasers)
(optional).
•
Weights fitting with distance-diameter caliper
arm.
1. Place the adhesive weight on the arm grippers.
Fit the adhesive weight
in the pliers of the gauge rod
2. Pull out the gauge until the arrows (
Fig. 52 ref.
_
6
)
both turn green.
3. Rotate the gauge arm until the weight touches the
rim.
Fit weight on the position
where pliers touches the wheel
4. Bring the distance-diameter caliper arm into rest-
ing position.
5. Press the
button to change the weight fit-
ting side.
SPLIT program
or MATCHING
SPOKES Program
ECO-WEIGHT
Program
IF THE GUARD AND REPOSITION-
ING FUNCTION ARE DISABLED,
ON POS. 7 (FIG. 51) BUTTON YOU
WILL SEE THE
ICON THAT
WILL ALLOW THE WHEEL SPIN
WITHOUT RETURNING TO THE
PREVIOUS PAGE. THE POSITION-
ING OF THE WHEEL FOR THE
APPLICATION OF THE WEIGHTS
MUST BE DONE MANUALLY.
1297-M008-4_B
LIBRAK355 - LIBRAK355P - LIBRAK355S - LIBRAK355PS - LIBRAK355WS - LIBRAK355PWS
