GB
Page 28 of 68
INSTRUCTION, USE AND
MAINTENANCE MANUAL
14.2.1 Programs rapid setting and meas-
urements through distance-diameter
caliper arm
The use of the distance-diameter caliper arm allows
the rapid automatic wheel balancing program and the
measures entry. From page “Home”:
- bring into contact the weights fitting gripper with the
inner part of the rim (1 contact only) to select the
program "STATIC" (see
Fig. 42
).
Fig. 42
REPEATEDLY BRINGING THE
GAUGE'S ARM (FIG. 43 REF. 1) IN
CONTACT WITH THE MANDREL
(FIG. 43 REF. 2), THE PROGRAM
WILL CYCLE FROM "STATIC" TO
"STATIC 1" TO "2 STATIC" THEN
RETURNING TO THE BEGINNING.
1
2
Fig. 43
- bring into contact the weights fitting gripper with the
inner part of the rim (2 contact points) (see
Fig. 42)
to select “ALU-S” program.
REPEATEDLY BRINGING THE
GAUGE'S ARM (FIG. 43 REF. 1) IN
CONTACT WITH THE MANDREL
(FIG. 43 REF. 2), THE PROGRAM
WILL CYCLE FROM "ALU-S" TO
"ALU-S1" TO "ALU-S2" THEN RE-
TURNING TO THE BEGINNING.
WHENEVER THE DISTANCE-DI-
AMETER CALIPER AND/OR THE
EXTERNAL DATA GAUGE (GAR307
OR GAR305, SEE FIG. 44) (IF ANY)
IS KEPT IN POSITION FOR A FEW
SECONDS AGAINST THE RIM
(UNTIL THE MACHINE MAKES AN
APPROPRIATE SOUND NOTIFICA-
TION) , THE POSITION IS STORED
AND THE VALUES MEASURED IN
THE PRE-ARRANGED FIELDS IN
THE SELECTED WHEEL BALANC-
ING PROGRAM ARE LOADED.
Fig. 44
Width
automatic
measurement
Width
automatic
measurement
GAR305
GAR307
1297-M008-4_B
LIBRAK355 - LIBRAK355P - LIBRAK355S - LIBRAK355PS - LIBRAK355WS - LIBRAK355PWS
