GB
Page 18 of 68
INSTRUCTION, USE AND
MAINTENANCE MANUAL
9.3.7 Monitor fitting
1. Unscrew the nuts (
Fig. 22A ref. 1
) and the wash-
ers (
Fig. 22A ref. 2
) from the screws (
Fig. 22A
ref. 3
). Fit the support tube (
Fig. 22A ref. 4
)
rotated through 90°. Then screw the previously
unscrewed nuts and washers again.
3
1
1
2
2
3
4
5
4
Fig. 22
DURING THIS OPERATION PAY
PARTICULAR ATTENTION TO
THE POWER SUPPLY/SIGNAL CA-
BLE OF THE MONITOR
(
FIG. 22A
REF. 5
)
IN ORDER NOT TO DAM-
AGE IT.
2. Connect the plugs on the power supply sockets and
monitor signal. Connect the wiring of the keyboard.
3. Fix the monitor (
Fig. 23A ref. 1
) to the support
(
Fig. 23A ref. 2
) with the screws (
Fig. 23A ref. 3
)
and the washers (
Fig. 23A ref. 4
) supplied.
1
2
3
3
4
Fig. 23A
4. Fix the guard (
Fig. 24A ref. 1
) to the support
(
Fig. 24A ref. 2
) with the 6 screws (
Fig. 24A
ref. 3
) and the washers (
Fig. 24A ref. 4
) supplied.
1
2
3
3
4
4
Fig. 24A
1297-M008-4_B
LIBRAK355 - LIBRAK355P - LIBRAK355S - LIBRAK355PS - LIBRAK355WS - LIBRAK355PWS
