GB
Page 46 of 52
INSTRUCTION, USE AND
MAINTENANCE MANUAL
22.0 ERROR SIGNALS
During wheel balancer operation, if wrong commands are given by the operator or device faults occur, an er
-
ror code or symbol may appear on the display screen D1. Press key
to return to the previous program
phase after remedying the fault. Below is a troubleshooting chart.
Error code
Cause
E. 2
→
No rotation
May be due to faulty position transducer or transducer not fitted cor
-
rectly. Or else the motor is faulty or has not started because something
is preventing its rotation.
E. 3
→
Excessive weight value
in wheel balancer cali
-
bration
During the calibration procedure, the machine detects excessive weight.
The weight may not have been fitted properly; the data acquisition or
measurement sensor may be faulty.
E. 8
→
Insufficient weight value
in wheel balancer cali
-
bration
During the calibration procedure, the machine detects insufficient weight.
The weight may not have been fitted properly; the data acquisition or
measurement sensor may be faulty.
E. 9
→
Calibration spin not
completed
During the calibration procedure, the spin is not completed because the
key has been pressed.
LIBRAK240RTLD - LIBRAK240RTLCD
1294-M015-0_B
