GB
Page 40 of 52
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Take the pliers of the automatic distance/diameter
caliper and bring it to the rim edge
Detect the measure in mm and enter it through keys
/
:
DYN LEDs will be flashing as well.
Press the
key.
These symbols will be shown on D1 and D2 displays:
Press key
to perform wheel spin.
These symbols will be shown on D1 and D2 displays:
fit 100 g weight provided outside the rim, exactly at
“12 o'clock”.
Press key
to perform wheel spin.
These symbols will be shown on D1 and D2 displays:
Press key
to release the wheel and to move the
100 gr weight on rim inner part, at “12 o'clock” again
(in opposite position).
At the end of the spin the following symbols will be
displayed:
if the procedure has been brought to a satisfactory
conclusion; on the contrary the error code will be
displayed.
Press the key
to confirm and press the key
, several times, to return to the starting page
with blinking symbols
1294-M015-0_B
LIBRAK240RTLD - LIBRAK240RTLCD
