INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 21 of 52
Letter
will appear on “D1” display to indicate
rim diameter value insert. The value on display “D2”
starts flashing.
Use keys
/
to set the detected value
on “D2” display.
Press key
to switch to the entry of the next
required.
Letter
will appear on “D1” display, to indicate
the entry of the distance value of weight application
point from the machine (see
Fig.
_
19
). The value on
display “D2” starts flashing.
Fig. 19
Width measurement
Use keys
/
to set the value read on the
graduated scale on “D2” display (see
Fig.
_
20
).
Fig. 20
Graduated scale
Dimension entry for
DYNAMIC
mode is completed.
15.1.2 Entry of measures
• To make a measurement in static mode ST1-ST2:
press key
until selecting
STAT-2 (LED STAT/
ST1-2 + LED inner adhesive weight) or STAT-1
(LED STAT/ST1-2 + LED clip weight onto inner
edge) mode
.
STATIC 1 weight application point
STATIC 2 weight application point
Letter
will appear on “D1” display to indicate rim
diameter value insert.
Diameter measurement input
Use keys
/
to set the value required
on “D2” display.
Confirm the entered value by pressing key
.
Dimension entry for
ST1
or
ST2
mode is completed.
1294-M015-0_B
LIBRAK240RTLD - LIBRAK240RTLCD
