GB
Page 22 of 52
INSTRUCTION, USE AND
MAINTENANCE MANUAL
• To make a measurement in ALU-S mode:
Press key
to select ALU-S balancing program.
The corresponding LED turns on.
Weight application
points
ALU-S mode
Press key
to switch to the entry of the meas
-
ures required.
The displays will show some flashing led, as indicated
in the example below:
Flashing LED
When key
is pressed, “D2” display starts
flashing: use keys
/
to enter “rim di
-
ameter” value.
When key
is pressed, “D1” display starts
flashing.
Flashing LED
Flashing display
In order to acquire the value required, extract the
graduated scale and place it where indicated by
weight application LED, lit up on the display.
Weight application point
Use keys
/
to set the value read on the
graduated scale on “D1” display (“outer distance”).
Press key
to come back to the first page.
“D1” value, blinking on the display, indicate the “in
-
ner distance”, to be detected as follows: extract the
graduated scale and place it where indicated by the
LED as indicated in the example below.
Weight application point
Use keys
/
to set the value read on the
graduated scale on “D1” display (“inner distance”).
Dimension entry for
ALU-S
mode is completed.
1294-M015-0_B
LIBRAK240RTLD - LIBRAK240RTLCD
