GB
Page 2 of 52
INSTRUCTION, USE AND
MAINTENANCE MANUAL
SUMMARY
SYMBOLS USED IN THE MANUAL AND
ON THE MACHINE ________________________ 5
1.0 GENERAL INTRODUCTION __________ 7
1.1 Introduction ____________________________ 7
2.0 INTENDED USE _____________________ 7
2.1 Training of personnel __________________ 7
3.0 SAFETY DEVICES ___________________ 8
3.1 Residual risks __________________________ 8
4.0 GENERAL SAFETY RULES __________ 8
5.0 PACKING AND MOBILIZATION FOR
TRANSPORT ________________________ 9
6.0 UNPACKING ________________________ 10
7.0 MOBILIZATION _____________________ 10
8.0 WORKING ENVIRONMENT CONDI-
TIONS ______________________________ 11
8.1 Working area __________________________11
8.2 Lighting _______________________________11
9.0 MACHINE ASSEMBLY ______________ 12
9.1 Anchoring system _____________________12
9.2 Accessories contained in the packing _12
9.3 Assembly procedure ___________________13
9.3.1 Fitting the shaft on the flange _____13
9.3.2 Mounting of foot guard protection _13
10.0 ELECTRICAL CONNECTION ________ 14
10.1 Electrical checks ______________________14
11.0 AIR CONNECTION __________________ 15
12.0 MULTIFUNCTION LED PANEL ______ 15
12.1 DISPLAY and LEDs brightness adjust-
ment___________________________________16
13.0 FITTING THE WHEEL ON THE MAN-
DREL ______________________________ 16
13.1 Loading the wheel on the mandrel
with lifting device _____________________16
13.2 Wheel assembly ________________________17
14.0 SWITCHING THE MACHINE ON AND
OFF ________________________________ 18
15.0 WHEEL BALANCING _______________ 19
15.1 Determination of wheel dimensions ___19
15.1.1 Manual setting of wheel
dimensions ________________________19
15.1.2 Entry of measures _________________21
15.2 User management _____________________24
15.3 Unbalance measurement ______________24
15.3.1 Indicative display of points where
to fit weight ________________________24
15.3.2 Balancing mode ____________________25
15.3.3 Dynamic balancing ________________26
15.3.4 ALU-S procedure ___________________26
15.3.5 Static balancing (STAT) ___________27
15.3.6 Positioning the correction
weights on the wheel_______________27
15.4 Measuring the unbalance with auxil-
iary programs _________________________28
15.4.1 ALU1 procedure ____________________30
15.4.2 PAX mode __________________________31
15.5 Recalculation Function ________________31
15.6 ECO-WEIGHT procedure _______________31
16.0 WHEEL BALANCING IN MOTOR-
BIKE MODE ________________________ 33
17.0 SPLIT PROCEDURE ________________ 33
18.0 WEIGHTS HIDDEN BEHIND
SPOKES MODE _____________________ 35
19.0 MATCHING PROCEDURE (Rim - Tyre
Optimization) ______________________ 36
20.0 CALIBRATION ______________________ 38
20.1 “Zero mandrel” setting ________________39
20.2 Weight measurement sensors calibra-
tion (CAR mode) _______________________39
20.3 Weight measurement sensors calibra-
tion (TRUCK mode) ____________________41
21.0 USER’S SETTING AND CUSTOMIZA-
TIONS ______________________________ 42
21.1 Setting measurements units for rim
weight and width/diameter ____________43
21.2 Users’ management - Motorbike mode
- Eco-Weight - Residual static setting __43
21.3 Setting of Repositioning - Comfort -
Carter - Pax ___________________________43
21.4 Width measurement option setting ____44
21.5 Weights display management _________44
21.6 Setting adhesive weight dimensions
and static threshold percentage _______45
22.0 ERROR SIGNALS ___________________ 46
23.0 ROUTINE MAINTENANCE __________ 47
1294-M015-0_B
LIBRAK240RTLD - LIBRAK240RTLCD
