GB
Page 42 of 52
INSTRUCTION, USE AND
MAINTENANCE MANUAL
After wheel spin, the following symbols will be shown
on display screens D1 and D2:
Weight measurement sensors calibration is over, press
key
to confirm; D1 and D2 displays will shown
these symbols:
Press keys
,
in a sequence to quit the
calibration stage and to come back to program pres
-
entation page.
21.0 USER’S SETTING AND CUSTOMIZA-
TIONS
From program starting page, press keys
and
at the same time; the following symbols will be
shown on D1 and D2 display screens:
Enter password
,
,
,
; the
following symbols will be shown on D1 and D2 display
screens:
Use keys
/
to select the
PARAMETERS
setting
(
P
stands for Parameters). These symbols will
be shown on D1 and D2 displays:
Press key
to confirm. The following symbols
will be shown on D1 and D2 display screens:
PARAMETER
NUMBER
At first
it flashes
(it can be scrolled)
PARAMETER
VALUE
At first it
does NOT flash
The D1 display screen on the left shows a parameter
number, while the corresponding parameter value is
shown on D2 display screen on the right side. The
number on D1 display is flashing.
To scroll parameters from 1 to 24, press keys
/
.
To edit a parameter value, press key
first to
move the “flashing” on D2 right display, then press
keys
/
.
To move again the “flashing” on D1 display screen on
the left side, press
again.
A special setting is connected to each parameter, as de
-
scribed in the following paragraphs. Modified the ones
that require it and at the end press the key
to
exit, press it several times to return to the starting page.
LIBRAK240RTLD - LIBRAK240RTLCD
1294-M015-0_B
