INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 31 of 116
GB
ERGOLOCK.CB - AD - ST
7102-M004-0_B
N.
1
1
2
0326001
0322000
1205900
Level protection
Bead lifting lever
Rimsled, mobile insert
9.2
Assembly procedure
Assemble the machine with the help of
Fig. 7
, after
checking that in the packing there are the following
parts:
N.
2
2
1
1
4
3
2
3
1
4
4
1
3
2176000
2175000
236007
237043
206019
222007
222011
203058
1357000
206188
237011
1811000
236004
M10 nut protection plug
M6 nut protection plug
Fe 10,5x21x2 washer
10x30x2,5 flat washer
TCEI M6x16 screw
M6 high nut
M10 high nut
TE M10x25 screw
5x28x130 spring
TCEI M6x12 screw
ø6x18 flat washer
TE M10x35 screw
6,4 flat washer
3. Before moving the column (
D
) position the mount-
ing arm (
Fig. 8
) as indicated in the figure and lock
it. This is achieved using the locking knob. Now
remove the column from the pallet and put it on
the floor near the machine.
4. Lift the machine body and position it on the floor.
Fig. 7
DO NOT LAY THE BEAD-
BREAKER HORIZONTALLY AS
THIS COULD CAUSE THE OIL
RESERVOIR TO EMPTY.
Fig. 8
9.0
ASSEMBLY AND PREPARATION
FOR USE
After having freed the various components from the
packing check that they are complete, and that there
are no anomalies, then comply with the following in-
structions for the assembly of the components mak-
ing use of the attached series of illustrations.
9.1
Accessories contained in the packing
The packing case contains also the accessory box.
Check that all the parts listed are there.
Code
Description
Code
Description
Push
Locking
knob
1. Remove the packing from the extension (
E
) taking
care of the mirror (
C
) contained in the wrapping.
2. (
Only for versions CB and AD
)
Raise the bead-breaker (
B
) from the pallet using a
system that is able to support its weight, which is
about 60 kg., and position it vertically near the in-
stallation area.