BUSKRO BK730-2 User Manual Download

Page: 78 / 157

Appendix A

Assembly

Drawings

Balloon Annotation and Parts Listing

Item Number

Quantity

Item

Part Number

Quantity

Description

Reference

The following is a description of how to interpret the information in this section:

Item:

This column indicates the item number used for each unique part in an assembly drawing.

It is matched with the top number in the balloon pointing at the associated part.

Part Number:

This column represents the Buskro part number.

Quantity:

This represents the total number of a given part in an assembly. It is matched with the

bottom number in the balloon pointing at the associated part.

Description:

This column contains a brief description of the part.

Reference:

This column indicates the page location for sub-assemblies.

Buskro Ltd.

BK730-2 Tabber

Summary of Contents for BK730-2






























































































































































Search results

Summary of Contents for BK730-2

Reviews:

Related manuals for BK730-2

Brands by name

Popular brands

BUSKRO BK730-2, User Manual

Search results

Summary of Contents for BK730-2

Reviews:

Related manuals for BK730-2

Brands by name

Popular brands