BUSKRO BK730-2 User Manual Download

Page: 64 / 157

Chapter 4

User

Interface

Page 4-6

4.3 Keypad Test Menu

The Labeler is equipped with diagnostic tools that allow for the testing of various

functions of the head. This is an important troubleshooting tool that can be used to isolate

a given problem. If any one of these tests fails, it can compromise the performance or

even functionality of the system. In order to access the diagnostic tools, reference the

following instructions:

1. If the keypad does not say “OFFLINE”, press the

<Online>

key.

2. Press

the

<Test>

button.

3. Press the Up or Down arrow keys to scroll through the different tests.

4. Press

<Online>

to exit the Test menu.

There are a total of 12 different tests under the Test menu. They are described in

Table

4-1

. Also reference

Section

Error! Reference source not found. for the sensor locations.

Buskro Ltd.

BK730-2 Tabber

Summary of Contents for BK730-2






























































































































































Search results

Summary of Contents for BK730-2

Reviews:

Related manuals for BK730-2

Brands by name

Popular brands

BUSKRO BK730-2, User Manual

Search results

Summary of Contents for BK730-2

Reviews:

Related manuals for BK730-2

Brands by name

Popular brands