manualshive.com logo in svg

BUSKRO BK730-2, User Manual

Share
Download
BUSKRO BK730-2 User Manual Download Page 7

Chapter 1

 General 

Information 

 

Page 1-2 

  

1.2  Features 

1.2.1  High Speed Production 

The BK730-2 is capable of high production speeds in excess of 30,000 PPH for single tab 

operations, 25,000 PPH for double tab operations, and 23,000 PPH for triple tab 

operations.  The unit has been solidly constructed with electrical components capable of 

delivering reliable, full-day production. 

1.2.2  Integration with Buskro and 3

rd

 Party Equipment 

The BK730-2 can now be easily integrated with Buskro inline inkjet, flipover, feeders, 

and third party equipments.  This is now possible due to the new Base Control Board (p/n 

9102380) that comes standard with all next generation Tabbers.  The features and 

technical discussion of the board’s operation is presented in section 2.3 of chapter 2.  

Connections to all inline systems are made through an upstream or downstream connector 

(located at the in-feed and out-feed of the base) providing all interface functions.  The 

required cable for Buskro machines to connect upstream and downstream equipment is the 

Universal Interconnect Cable (p/n 9102083A).  The Base Control Board passes on a 

variety of signals including stop, momentary start signal for upstream and downstream 

machines, run signal for upstream equipment, speed control, encoder, and a Heater ON 

signal for downstream heaters.    

1.2.3  Simplified Mechanical Adjustments 

Product size acceptance and compensation is performed on the base through simple 

mechanical knob controls; one for product thickness and the other for tab edge selection.  

In addition, some simple adjustments can be made in the tab forming area to fine-tune the 

tab-wrapping process for improved tab-wrap quality. 

The Tabber/Labeler head is designed for ease of use and portability.  The operator keypad 

is easily accessible simply by sliding it in and out of view.  The head is mounted on two 

aluminum extrusion rails that allow easy movement for left and right tabbing and fine 

Buskro Ltd. 

 

BK730-2 Tabber 

Summary of Contents for BK730-2






























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands