Chapter 4
User
Interface
Page 4-14
Note
: It is recommended that the automatic label pitch function be used. This function
will also adjust the sensor gain automatically. If the Peel Point sensor gain is not
properly set, the label placement will not be accurate.
This setting should only be used if there is a noticeable degradation in the
positioning of the labels on the product and when the manual label pitch function
is used to set label pitch.
4.4.9 Peel Point Sensor Nudge Factor
The nudge factor allows the BK731-2 to automatically offset the label relative to the Peel
Point. A positive nudge factor will cause the labels to protrude outside of the Peel Point
tip more during labeling operation. This setting can help in improving accurate label
placement when set properly. In order to set the peel point nudge factor:
1. If the keypad does not say “OFFLINE”, press the
<Online>
key.
2. Press
the
<Labels>
button.
3. Press the Down arrow key until the display reads
“SENSOR NUDGE:
±
”
.
4. Press
the
<+>
or
<->
key to increase or decrease the nudge factor
5. Press
<Online>
to exit the Labels menu.
4.5 Operational Controls
This section describes the functions available during normal operation of the Labeler
system.
4.5.1 Online/Offline Status
The head must be placed online whenever the labeling operation is required. Conversely,
placing the system offline will result in the suspension of the labeling operation. To place
the system online or offline, press the green
<ONLINE>
button. The system will be
offline during initial startup, whenever an error condition is detected, or when the user
manually takes the system offline.
Note
: When the system is placed offline, the Labeler system will immediately cease
operation.
Buskro Ltd.
BK730-2 Tabber
Summary of Contents for BK730-2
