Bush DLED49287HDCNTDFVP, Instruction Manual

Page: 31 / 55

You can connect audio devices or remote controllers
wirelessly to your TV. Unplug or switch off any other
connected audio device in order for wireless connection
feature to work correctly. For audio devices you should
use the
Audio Link option in the System>Sound menu,
for remote controllers the Smart Remote option in the
System>Settings>More
menu. Select the menu option
and press the
OK
button to open the related menu.
Using this menu you can discover and connect the
devices that use the same wireless technology and start
to use them. Follow the on-screen instructions. Start the
device discovery. A list of available wireless devices will
be displayed. Select the device you want to connect from
the list and press the
OK button to connect. If “ Device
connected ” message is displayed, the connection is
successfully established. If the connection fails try it again.
Image transfer and audio streaming
You can also use this type of connection to transfer
images or stream audio from your mobile device to
your TV.
Pair the mobile device and the TV as described before.
Start a device search in your hand-held device. Select
your TV from listed devices. Confirm the request for
connection on your TV screen and do the same on your
hand held device screen. If no pairing is done, image
transfer or audio streaming to the TV will not be possible.
The images sent by mobile device will be displayed on
the TV without confirmation request, if the image file is
suitable. You can also save the image file to a connected
USB memory drive or set as boot logo, if this feature is
supported and the file is suitable. Press the
Exit button to
terminate displaying the image.
The audio will be routed through the speakers of the
TV, after confirmation is given. To start audio streaming
unpair the device from your TV if it is paired with your
TV previously. After pairing is completed, a confirmation
message will be displayed asking whether you want to
start audio streaming from your mobile device. Select
Yes
and press the
OK
button on the remote of the TV.
If the connection is succeeded, all audio will be routed
through the speakers of the TV. A symbol will appear
on the upper side of the TV screen as long as the audio
streaming connection is active. To terminate the audio
streaming, you should turn off the wireless connection
of your mobile device.
Close all running applications and all the menus on the
TV for a trouble-free transfer. Only image files with sizes
smaller than 5 MB and in the following file formats are
suitable; .jpg, .jpeg, .png, bmp. If a file sent by the mobile
device does not suit these requirements, it will not be
displayed on the TV.
Note: Wireless devices may operate within the same radio
frequency range and may interfere with one another. To
improve the performance of your wireless device place
it at least 1 meter away from any other wireless devices.
Connectivity Troubleshooting
Wireless Network Not Available
• Ensure that any firewalls of your network allow the TV
wireless connection.
• Try searching for wireless networks again, using the
Network/Internet Settings menu screen.
If the wireless network does not function properly, try
using the wired network in your home. Refer to the
Wired Connectivity section for more information on
the process.
If the TV does not function using the wired connection,
check the modem (router). If the router does not have a
problem, check the internet connection of your modem.
Connection is Slow
See the instruction book of your wireless modem to
get information on the internal service area, connection
speed, signal quality and other settings. You need to have
a high speed connection for your modem.
Distruption during playback or slow reactions
You could try the following in such a case:
Keep at least three meters distance from microwave
ovens, mobile telephones, bluetooth devices or any
other Wi-Fi compatible devices. Try changing the active
channel on the WLAN router.
Internet Connection Not Available / Audio Video
Sharing Not Working
If the MAC address (a unique identifier number) of your PC
or modem has been permanently registered, it is possible
that your TV might not connect to the internet. In such a
case, the MAC address is authenticated each time when
you connect to the internet. This is a precaution against
unauthorized access. Since your TV has its own MAC
address, your internet service provider cannot validate the
MAC address of your TV. For this reason, your TV cannot
connect to the internet. Contact your internet service
provider and request information on how to connect a
different device, such as your TV, to the internet.
It is also possible that the connection may not be available
due to a firewall problem. If you think this causes your
problem, contact your internet service provider. A firewall
might be the reason of a connectivity and discovery
Advanced features
Getting the most from your TV
Advanced features 30
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,