Bush DLED49287HDCNTDFVP, Instruction Manual

Page: 30 / 55

• The location where the transmission is most effective
differs depending on the usage environment.
• The Wireless feature of the TV supports 802.11 a,b,g & n
type modems. It is highly recommended that you should
use the IEEE 802.11n communication protocol in order to
avoid any possible problems while watching videos.
• You must change your modem’s SSID when there are
any other modems around with the same SSID. You can
encounter connection problems otherwise. Use a wired
connection if you experience problems with a wireless
connection.
Configuring Wireless Device Settings
Open the Network/Internet Settings menu and select
Network Type as Wireless Device to start connection
process.
The TV will scan the wireless networks automatically. A list
of available networks will be displayed. Please select your
desired network from the list.
Note: If the modem supports N mode, you should set N
mode settings.
If the selected network is protected with a password, please
enter the correct key by using the virtual keyboard. You can
use this keyboard via the directional buttons and the
OK
button on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now established. To
disconnect from a wireless network, highlight
Network
Type and press Left or Right buttons to set as Disabled .
Highlight Internet Speed Test and press the OK button to
check your internet connection speed. Highlight Advanced
Settings and press the OK button to open the advanced
setting menu. Use directional and numeric buttons to set.
Press the
OK button to save settings when complete.
Other Information
The status of the connection will be displayed as
Connected or Not Connected and the current IP address,
if a connection is established.
Connecting to your mobile device via WiFi
• If your mobile device has WiFi feature, you can connect
it to your TV via a router, in order to access the content
in your device. For this, your mobile device must have
an appropriate sharing software.
• Connect to your router following the steps stated above
in the Wireless Connectivity section.
• Afterwards, engage your mobile device with the router
and then activate the sharing software on your mobile
device. Then, select files that you want to share with
your TV.
• If the connection is established correctly, you will be able
to access the shared files from your mobile device via the
Media Browser of your TV.
• Enter the Media Browser menu and the playback device
selection OSD will be displayed. Select your mobile device
and press the
OK
button to continue.
• If available, you can download a virtual remote controller
application from the server of your mobile device
application provider.
Note:
This feature may not be supported on all mobile
devices.
Wireless Display
Wireless Display is a standard for streaming video and
sound content by Wi-Fi Alliance. This feature provides the
ability to use your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and TV.
Then press the
Source
button on the remote and switch
to
Wireless Display
source.
A screen appears stating that the TV is ready for
connection.
Open the sharing application on your mobile device.
These applications are named differently for each brand,
please refer to the instruction manual of your mobile
device for detailed information.
Scan for devices. After you select your TV and connect,
the screen of your device will be displayed on your TV.
Note: This feature can be used only if the mobile device
supports this feature. Scanning and connecting processes
differ according to the programme you use. Android
based mobile devices should have the software version
V4.2.2 and above.
Connecting Other Wireless Devices
Your TV supports another short range wireless connection
technology too. A pairing is required before using these
kind of wireless devices with the TV set. You should do
the followings to pair your device with the TV:
• Set the device to pairing mode
• Start device discovery on the TV
Note: Refer to the user manual of the wireless device to
learn how to set the device to pairing mode.
Advanced features
Getting the most from your TV
Advanced features 29
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105 .