Bush DLED49287HDCNTDFVP, Instruction Manual

Page: 24 / 55

Software upgrade search via user
interface
On the main menu select System>Settings and then
More . Navigate to Software upgrade and press the
OK button. In Upgrade options menu select Scan for
upgrade and press OK button to check for a new software
upgrade.
If a new upgrade is found, it starts to download the upgrade.
After the download is completed confirm the question
asking about rebooting the TV by pressing the
OK
to
continue with the reboot operation.
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00 o’clock if
Automatic scanning option in the Upgrade options
menu is set to Enabled and if the TV is connected to an
aerial signal or to Internet. If a new software is found and
downloaded successfully, it will be installed at the next
power on.
Note:
Do not unplug the power cord while led is blinking
during the reboot process. If the TV fails to come on after
the upgrade, unplug, wait for two minutes then plug it
back in.
Firmware Update via the Internet
Note: Connect TV to the internet (via WiFi or Ethernet)
Manual Download (Pull)
1. Press Menu on your remote control and continue through to
System
→
Settings
→
More…
→
Software Upgrade
→
Scan for
Upgrade
2. The TV will download and run the upgrade automatically
3.
Please make sure to keep your TV on for the duration of the
upgrade – do not power off!
4.
During the upgrade, the picture will turn off but don’t worry as
this means the update has started. The standby light will flash
slowly at first to download and then fast as the upgrade starts.
5.
After the download is complete, your Finlux TV will reboot and
show a pop-up screen of how to launch the Freeview Play portal
via your remote control
6. Press EXIT to leave the pop-up screen, then press FPlay
button on the remote control to bring up the Freeview Play
Manufacturer T&Cs
7. The Freeview Play Manufacturer T&Cs will appear
8.
Press Page Up to scroll through the T&Cs quicker; you must
accept the T&Cs in order for Freeview Play to work.
9. After accepting the T&Cs, you will be able to access Freeview
Play and enjoy everything it has to offer.
Automatic Download (Push)
1. Turn your TV on, a pop-up menu about the upgrade will show
after 10 - 20 minutes
2.
Press OK to start upgrading your TV
3. Please make sure to keep your TV on for the duration of the
upgrade – do not power off!
4.
During the upgrade, the picture will turn off but don’t worry as
this means the update has started. The standby light will flash
slowly at first to download and then fast as the upgrade starts.
5. After the download is complete, your TV will reboot and show
a pop-up screen of how to launch the Freeview Play portal via
your remote control
6. Press EXIT first and then FPlay button on the remote control to
bring up the Freeview Play Manufacturer T&Cs
7. The Freeview Play Manufacturer T&Cs will appear
8. Press Page Up to scroll through the T&Cs quicker; you must
accept the T&Cs in order for Freeview Play to work.
9. After accepting the T&Cs, you will be able to access Freeview
Play and enjoy everything it has to offer.
Advanced features
Getting the most from your TV
Advanced features 23
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105 .