Bush DLED49287HDCNTDFVP, Instruction Manual

Page: 29 / 55

Connectivity
Wired Connectivity
To Connect to a Wired Network
• You must have a modem/router connected to an active
broadband connection.
• Connect your PC to your modem/router. This can be a
wired or wireless connection.
• Connect your TV to your modem/router via an ethernet
cable. There is a LAN port at the rear (back) of your TV.
Broadband ISP connection
LAN (ethernet) cable
LAN input on the rear
side of the TV
To configure wired settings please refer to the Network/
Internet Settings section in the System>Settings Menu.
• You might be able to connect your TV to your LAN
depending on your network’s configuration. In such a
case, use an ethernet cable to connect your TV directly
to the network wall outlet.
LAN input on the rear
side of the TV
network wall
socket
Configuring Wired Device Settings
Network Type
The Network Type can be selected as Wired Device,
Wireless Device
or
Disabled
, in accordance with the active
connection to the TV set. Select this as
Wired Device
if you
are connecting via an ethernet.
Internet Speed Test
Highlight
Internet Speed Test
and press the
OK
button. TV
will check the internet connection bandwidth and display
the result when complete.
Advanced Settings
Highlight Advanced Settings and press the OK button.
On the next screen you can change the IP and DNS
settings of the TV. Highlight the desired one and press
Left or Right button to change the setting from
Automatic
to Manual . Now you can enter the Manual IP and / or
Manual DNS
values. Select the related item in the drop
down menu and enter the new values using the numeric
buttons of the remote. Press the
OK
button to save
settings when complete.
Wireless Connectivity
To Connect to a Wireless Network
The TV cannot connect to the networks with a hidden
SSID. To make your modem’s SSID visible, you should
change your SSID settings via the modem’s software.
To Connect to a wireless LAN, you should perform the
following steps:
• To configure your wireless settings please refer
to the
Network/Internet Settings
section in the
System>Settings Menu
.
Broadband ISP
connection
A Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous
2.4 and 5 GHz bands is designed to increase bandwidth.
These are optimized for smoother and faster HD video
streaming, file transfers and wireless gaming.
• The frequency and channel differ depending on the
area.
• The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line traffic and
the products that you use. The transmission may also
be cut off or may get disconnected depending on the
radio wave conditions, DECT phones or any other WiFi
11b appliances. The standard values of the transmission
speed are the theoretical maximum values for the
wireless standards. They are not the actual speeds of data
transmission.
Advanced features
Getting the most from your TV
Advanced features 28
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,