Bush BD-618 AM/FM, Instruction Manual

Page: 40 / 48

Product support
Help is always at hand
Product support
40
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Troubleshooting
If you are experiencing problems with your Micro, there are some quick and easy checks
that you can do, which may help to solve the problem.
CD Does not play:
Check that you are in CD mode. Press and release the Mode button on the Micro or on
the remote control to change the mode (check the display).
Take out the CD and check that it is not marked or scratched. Damaged CDs cannot be
played in the Micro or may skip or not rotate correctly.
Please check that you are using an original audio CD and not a copy. Often copied CDs
will not play.
No sound / power:
Adjust the volume using the rotary control on the Micro or the Vol + and Vol - buttons on
the remote control.
Check that the speakers are plugged fully home into the sockets on the back of the Micro.
Check that the mains power wall socket is switched on and that the Micro is not in
Standby mode.
You may have headphones connected. Either use the headphones to listen to your Micro
or unplug the headphones.
Check that you are trying to use the function buttons for the mode that you are in.
If you are using a Bluetooth connected device or an external sound source via Line in.
Increase the volume on the secondary device and on the Micro.