Bush BD-618 AM/FM, Instruction Manual

Page: 29 / 48

Using your Bluetooth Micro System
29
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
Using your Bluetooth Micro System
Let’s get started
1. Tune the Micro to the AM radio station that you wish to preset.
2.
Press and hold the Menu button on the front of the Micro or the Prog button on the
remote control for approximately 2 seconds until ‘P XX’ starts flashing on the display
(where XX is the preset number).
3.
Use the and buttons on the Micro or on the remote control to move to the
preset number that you would like to store the radio station to (1-10).
4. Press and release the Menu button on the Micro or the ‘Prog’ button on the remote
control, ‘P XX’ will stop flashing confirming that the preset has been stored.
Your Micro can automatically search for and store AM radio stations.
1. Press and release the button on the Micro or the Scan button on the remote
control. Your Micro will now scan for, and store, all of the available AM stations.
Note: If there is already an existing AM station stored under a preset, it will be
overwritten when you store new stations.
Tune to an AM station preset
In AM mode:
1. Press and release the Menu button on the front of the Micro or the Mem+ and Mem-
buttons on the remote control to move to the preset location and station that you
would like to listen to (1-10). When you pause between each press the frequency
stored under each preset location will be displayed and the Micro will tune to and play
the stored station.
Bluetooth mode
Check that your Micro is in Bluetooth (BT) mode. If you are not already in BT mode, press
and release the Mode button on the front of the Micro or on the remote control until you
are in BT mode (check the display). will flash in the display, whilst your product searches
for Bluetooth devices.