Bush BD-618 AM/FM, Instruction Manual

Page: 32 / 48

Using your Bluetooth Micro System
32
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Using your Bluetooth Micro System
Let’s get started
Aux in mode
Check that your Micro is in Aux in mode. If you are not already in Aux in mode, briefly
press and release the Mode button on the front of the Micro or on the remote control,
until you are in Aux in mode (check the display).
Using a 3.5mm audio input connection cable (not included), Aux in allows for a quick and
easy connection to an external sound source.
1. Connect one end of the 3.5mm audio connection cable to the headphone (or
auxiliary out) socket of your secondary device, connect the other end to the Line in
socket on the back of your Micro.
2. Press the Play button on your external device to start playback through the Micro
speakers.
To gain optimal volume levels, adjust the output volume level on both the secondary
device and on the Micro.
Note: It is recommended that you unplug the Audio cable from the Line in socket after
you have finished listening to your external device.