Burstner A 650, Instruction Manual

Page: 162 / 262

162
A-Modell - 11/12 - Ausgabe 09/11 - 2096161 - BUE-0036-10EN
Appliances
9
Manual operation
Switching on:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Refriger-
ator".
„
Press the on/off switch/energy selector switch (Fig. 172,1) down for 2 sec-
onds in order to switch on the appliance. The operating mode selected
most recently is shown in the operating indicator (Fig. 172,4).
„
Select the energy type with the on/off switch/energy selector switch
(Fig. 172,1).
„
Set the refrigerating temperature on the switch for temperature setting
(Fig. 172,6). The indicator LEDs (Fig. 172,5) show the selected thermostat
position.
When operated with 12 V, the refrigerator draws power only from the living
area battery.
Switching off:
„
Press down the on/off switch/energy selector switch (Fig. 172,1) for 2 sec-
onds. All displays close.
„
Close the gas isolator tap "Refrigerator" and the regulator tap on the gas
bottle.
9.6.4 Refrigerator door locking mechanism
With some models, the refrigerator has a separate freezer compartment. The
specifications in this section correspondingly also apply to the door of the
freezer compartment.
There are two positions for locking the refrigerator door in place:
z
Closed refrigerator door during travel and when the refrigerator is in oper-
ation
z
Slightly opened refrigerator door as a ventilation position when the refrig-
erator is switched off
Z
If the refrigerator is manually set to "12 V", it will constantly consume cur-
rent. Therefore, switch over to gas operation when the vehicle engine is
not running, and the vehicle is not connected to the 230 V power supply.
Z
Further information can be obtained from the separate instruction manual
"Refrigerator".
Z
During the journey the refrigerator door must always be closed and locked
in the closed position.
Z
Lock the refrigerator door in ventilation position when the refrigerator is
switched off. This prevents mould forming.