Page 15 of 82
Date: 27.01.06
Terminal assignments
Cables are connected via PG cable glands and screw terminals on the module.
All terminal blocks have a plug-in design, so they can be removed from the
module for convenient cable connection.
No more than 2 wires should be connected to one terminal. Ferrules are
recommended for connecting stranded wires.
Shielded cables must be used for the voltage-supply lines and signal conductors
to avoid interference on sensor signals or in the module.
1: +5V
2: A
1 (4): 24 V - PLC supply
2 (5): PLC - Output 1
3: PLC ground
2: PLC - Input 2
1: PLC - Input 1
7. Shield
3: Signal input +
2:
1: Exci
3: Ground 24 V
2: Protective ground
1: 24 V
5: Shield
4: B
3: GND
7 (10): Monitor output ground
6 (9): Monitor output 8V
3 (6): PLC – Output 2
4 (7): PLC – Output 3
5 (8): Protective ground
5: Sensor -
6: Excitation, ground -
4: Signal input -
