Page 80 of 82
Date: 27.01.06
10.3
Factory settings
Value
Default setting
Units string
“N”
Station name
“Station name”
Program name
“Program name”
Instrumentation amp setting
10 mV range
Excitation setting
2.5 V
Shunt setting
Open (
strain gage)
Number of averages
100 (
10/s)
Measurement function
DC
Input A function
None
Input B function
None
Lower limit
0.0
Upper limit
0.0
Tare value
0.0
Sensor test reference value
0.0
Sensor test tolerance value
0.0
Evaluation type
Dynamic
Filter
50 Hz
Scale: Lower scale value
0.0
Scale: Upper scale value
1.0
Scale: Lower calibration value
0.0
Scale: Upper calibration value
1.0
PROFIBUS-ID
2
Full calibration factor
1.0
Full calibration offset
0.0
These values are set by invoking the command DEFA! and then saving them in
the EEPROM using the command SEPR!.
10.4
Maintenance, Customer service and Warranty
10.4.1
Maintenance
The Sensor Profibus Module requires no maintenance by the user. Any repairs
that may be needed must be performed only at the manufacturer's premises.
Cleaning
Please do not use any cleaning agents that contain organic solvents or
concentrated inorganic constituents.
10.4.2
Customer service
Please supply the serial number and software version when contacting the
manufacturer with technical queries. Only then can the manufacturer find out the
