Burny 1100 CD, Owner'S Operation And Maintenance Manual

Page: 16 / 64

23 Lifter 6 down output 24 VDC @ 1 A See note above.
24 DC Lifter supply (+) Same as pin 19, except fused by FU3
17 DC Lifter supply (-) Same as pin 20, except fused by FU3
16 Chassis Ground 18 AWG wire
MYX-12384 REPLICATOR 1100 (for DC lifters)
“PLAS”
connector I/O ratings
PIN # DESCRIPTION RATINGS
1, 2 Plasma Start relay normally closed contacts 30 VDC or 230 VAC, 2 A
1, 3 Plasma Start relay normally open contacts 30 VDC or 230 VAC, 2 A
4, 5 Plasma Stop relay normally closed contacts 30 VDC or 230 VAC, 2 A
4, 6 Plasma Stop relay normally open contacts 30 VDC or 230 VAC, 2 A
7, 8 Height Sensor Disable relay normally open contacts 30 VDC or 230 VAC, 2 A
7, 9 Height Sensor Disable relay normally closed contacts 30 VDC or 230 VAC, 2 A
15 Arc On Sense input 24-115 V DC or AC, 30 mA max
16 Arc On Sense input 115-230 V DC or AC, 30 mA max
14 Arc On Sense input Return for signal of pin 15 or 16.
MYX-12384 REPLICATOR 1100 (for DC lifters)
“RMTR”
connector I/O ratings
PIN # DESCRIPTION RATINGS
3, 5 Clutch Switch on front panel 24 V max 3 A max
2, 8 Rail Axis Motor ± 30 VDC, 4 A
1, 4 Rail Axis Tach 20 V, 5 mA max
6 Input for + limit switch 10 mA required to pull the 24VDC input to ground
7 Input common for limit switches 25 mA, to be used as common for pins 6 and 9.
9 Input for - limit switch 10 mA required to pull the 24VDC input to ground